View TA79L015P_5803454.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

ta79l005,006,008,009,010,012,015,018,020,024p 2001-08-08 1 toshiba bipolar linear integrated circuit silicon monolithic ta79l005p,ta79l006p,ta79l008p,ta79l009p,ta79l010p, ta79l012p,TA79L015P,ta79l018p,ta79l020p,ta79l024p ? 5 v, ? 6 v, ? 8 v, ? 9 v, ? 10 v, ? 12 v, ? 15 v, ? 18 v, ? 20 v, ? 24 v three-terminal negative voltage regulators features best suited to a power supply for ttl and c 2 mos. built-in overcurrent protective circuit. built-in thermal protective circuit. maximum output current of 150 ma (t j = 25c). packaged in to-92mod. pin assignment gnd 2 3 in out marking side 1 equivalent circuit weight: 0.36 g (typ.)
ta79l005,006,008,009,010,012,015,018,020,024p 2001-08-08 2 maximum ratings (ta = 25c) characteristics symbol rating unit ta79l005p ta79l006p ta79l008p ta79l009p ta79l010p ta79l012p TA79L015P ? 35 ta79l018p ta79l020p input voltage ta79l024p v in ? 40 v power dissipation (ta = 25c) p d 800 mw operating temperature t opr ? 30~85 c storage temperature t stg ? 55~150 c junction temperature t j 150 c thermal resistance r th (j-a) 156 c/w
ta79l005,006,008,009,010,012,015,018,020,024p 2001-08-08 3 ta79l005p electrical characteristics (unless otherwise specified, v in = ? 10 v, i out = 40 ma, c in = 0.33 f, c out = 0.1 f, 0c t j 125c) characteristics symbol test circuit test condition min typ. max unit output voltage v out 1 t j = 25c ? 5.2 ? 5.0 ? 4.8 v ? 20 v v in ? 7.0 v D 55 150 line regulation regline 1 t j = 25c ? 20 v v in ? 8.0 v D 45 100 mv 1.0 ma i out 100 ma D 11 60 load regulation regload 1 t j = 25c 1.0 ma i out 40 ma D 5.0 30 mv ? 20 v v in ? 7.0 v, 1.0 ma i out 40 ma ? 5.25 D ? 4.75 output voltage v out 1 t j = 25c 1.0 ma i out 70 ma ? 5.25 D ? 4.75 v t j = 25c D 3.1 6.0 quiescent current i b 1 t j = 125c D D 5.5 ma ? i bi 1 ? 20 v v in ? 8.0 v D D 1.5 quiescent current change ? i bo 1 t j = 25c 1.0 ma i out 40 ma D D 0.1 ma output noise voltage v no 2 ta = 25c, 10 hz f 100 khz D 40 D v rms long term stability ? v out / ? t 1 D D 12 D mv/kh ripple rejection ratio r.r. 3 ? 18 v v in ? 8.0 v, t j = 25c, f = 120 hz 41 49 D db dropout voltage v d 1 t j = 25c D 1.7 D v average temperature coefficient of output voltage t cvo 1 i out = 5 ma D 0.6 D mv/c
ta79l005,006,008,009,010,012,015,018,020,024p 2001-08-08 4 ta79l006p electrical characteristics (unless otherwise specified, v in = ? 11 v, i out = 40 ma, c in = 0.33 f, c out = 0.1 f, 0c t j 125c) characteristics symbol test circuit test condition min typ. max unit output voltage v out 1 t j = 25c ? 6.24 ? 6.0 ? 5.76 v ? 21 v v in ? 8.1 v D 50 150 line regulation regline 1 t j = 25c ? 21 v v in ? 9.0 v D 45 110 mv 1.0 ma i out 100 ma D 12 70 load regulation regload 1 t j = 25c 1.0 ma i out 40 ma D 5.5 35 mv ? 21 v v in ? 8.1 v, 1.0 ma i out 40 ma ? 6.3 D ? 5.7 output voltage v out 1 t j = 25c 1.0 ma i out 70 ma ? 6.3 D ? 5.7 v t j = 25c D 3.1 6.0 quiescent current i b 1 t j = 125c D D 5.5 ma ? i bi 1 ? 21 v v in ? 9.0 v D D 1.5 quiescent current change ? i bo 1 t j = 25c 1.0 ma i out 40 ma D D 0.1 ma output noise voltage v no 2 ta = 25c, 10 hz f 100 khz D 40 D v rms long term stability ? v out / ? t 1 D D 14 D mv/kh ripple rejection ratio r.r. 3 ? 19 v v in ? 9.0 v, t j = 25c, f = 120 hz 39 47 D db dropout voltage v d 1 t j = 25c D 1.7 D v average temperature coefficient of output voltage t cvo 1 i out = 5 ma D 0.7 D mv/c
ta79l005,006,008,009,010,012,015,018,020,024p 2001-08-08 5 ta79l008p electrical characteristics (unless otherwise specified, v in = ? 14 v, i out = 40 ma, c in = 0.33 f, c out = 0.1 f, 0c t j 125c) characteristics symbol test circuit test condition min typ. max unit output voltage v out 1 t j = 25c ? 8.3 ? 8.0 ? 7.7 v ? 23 v v in ? 10.5 v D 20 175 line regulation regline 1 t j = 25c ? 23 v v in ? 11 v D 12 125 mv 1.0 ma i out 100 ma D 15 80 load regulation regload 1 t j = 25c 1.0 ma i out 40 ma D 7.0 40 mv ? 23 v v in ? 10.5 v, 1.0 ma i out 40 ma ? 8.4 D ? 7.6 output voltage v out 1 t j = 25c 1.0 ma i out 70 ma ? 8.4 D ? 7.6 v t j = 25c D 3.1 6.5 quiescent current i b 1 t j = 125c D D 6.0 ma ? i bi 1 ? 23 v v in ? 11 v D D 1.5 quiescent current change ? i bo 1 t j = 25c 1.0 ma i out 40 ma D D 0.1 ma output noise voltage v no 2 ta = 25c, 10 hz f 100 khz D 60 D v rms long term stability ? v out / ? t 1 D D 20 D mv/kh ripple rejection ratio r.r. 3 ? 23 v v in ? 12 v, t j = 25c, f = 120 hz 37 45 D db dropout voltage v d 1 t j = 25c D 1.7 D v average temperature coefficient of output voltage t cvo 1 i out = 5 ma D 0.8 D mv/c
ta79l005,006,008,009,010,012,015,018,020,024p 2001-08-08 6 ta79l009p electrical characteristics (unless otherwise specified, v in = ? 15 v, i out = 40 ma, c in = 0.33 f, c out = 0.1 f, 0c t j 125c) characteristics symbol test circuit test condition min typ. max unit output voltage v out 1 t j = 25c ? 9.36 ? 9.0 ? 8.64 v ? 24 v v in ? 11.4 v D 80 200 line regulation regline 1 t j = 25c ? 24 v v in ? 12 v D 20 160 mv 1.0 ma i out 100 ma D 17 90 load regulation regload 1 t j = 25c 1.0 ma i out 40 ma D 8.0 45 mv ? 24 v v in ? 11.4 v, 1.0 ma i out 40 ma ? 9.45 D ? 8.55 output voltage v out 1 t j = 25c 1.0 ma i out 70 ma ? 9.45 D ? 8.55 v t j = 25c D 3.2 6.5 quiescent current i b 1 t j = 125c D D 6.0 ma ? i bi 1 ? 24 v v in ? 12 v D D 1.5 quiescent current change ? i bo 1 t j = 25c 1.0 ma i out 40 ma D D 0.1 ma output noise voltage v no 2 ta = 25c, 10 hz f 100 khz D 65 D v rms long term stability ? v out / ? t 1 D D 21 D mv/kh ripple rejection ratio r.r. 3 ? 24 v v in ? 12 v, t j = 25c, f = 120 hz 36 44 D db dropout voltage v d 1 t j = 25c D 1.7 D v average temperature coefficient of output voltage t cvo 1 i out = 5 ma D 0.85 D mv/c
ta79l005,006,008,009,010,012,015,018,020,024p 2001-08-08 7 ta79l010p electrical characteristics (unless otherwise specified, v in = ? 16 v, i out = 40 ma, c in = 0.33 f, c out = 0.1 f, 0c t j 125c) characteristics symbol test circuit test condition min typ. max unit output voltage v out 1 t j = 25c ? 10.4 ? 10.0 ? 9.6 v ? 25 v v in ? 12.5 v D 80 230 line regulation regline 1 t j = 25c ? 25 v v in ? 13 v D 30 170 mv 1.0 ma i out 100 ma D 18 90 load regulation regload 1 t j = 25c 1.0 ma i out 40 ma D 8.5 45 mv ? 25 v v in ? 12.5 v, 1.0 ma i out 40 ma ? 10.5 D ? 9.5 output voltage v out 1 t j = 25c 1.0 ma i out 70 ma ? 10.5 D ? 9.5 v t j = 25c D 3.2 6.5 quiescent current i b 1 t j = 125c D D 6.0 ma ? i bi 1 ? 25 v v in ? 13 v D D 1.5 quiescent current change ? i bo 1 t j = 25c 1.0 ma i out 40 ma D D 0.1 ma output noise voltage v no 2 ta = 25c, 10 hz f 100 khz D 70 D v rms long term stability ? v out / ? t 1 D D 22 D mv/kh ripple rejection ratio r.r. 3 ? 24 v v in ? 13 v, t j = 25c, f = 120 hz 36 43 D db dropout voltage v d 1 t j = 25c D 1.7 D v average temperature coefficient of output voltage t cvo 1 i out = 5 ma D 0.9 D mv/c
ta79l005,006,008,009,010,012,015,018,020,024p 2001-08-08 8 ta79l012p electrical characteristics (unless otherwise specified, v in = ? 19 v, i out = 40 ma, c in = 0.33 f, c out = 0.1 f, 0c t j 125c) characteristics symbol test circuit test condition min typ. max unit output voltage v out 1 t j = 25c ? 12.5 ? 12.0 ? 11.5 v ? 27 v v in ? 14.5 v D 120 250 line regulation regline 1 t j = 25c ? 27 v v in ? 16 v D 100 200 mv 1.0 ma i out 100 ma D 20 100 load regulation regload 1 t j = 25c 1.0 ma i out 40 ma D 10 50 mv ? 27 v v in ? 14.5 v, 1.0 ma i out 40 ma ? 12.6 D ? 11.4 output voltage v out 1 t j = 25c 1.0 ma i out 70 ma ? 12.6 D ? 11.4 v t j = 25c D 3.2 6.5 quiescent current i b 1 t j = 125c D D 6.0 ma ? i bi 1 ? 27 v v in ? 16 v D D 1.5 quiescent current change ? i bo 1 t j = 25c 1.0 ma i out 40 ma D D 0.1 ma output noise voltage v no 2 ta = 25c, 10 hz f 100 khz D 80 D v rms long term stability ? v out / ? t 1 D D 24 D mv/kh ripple rejection ratio r.r. 3 ? 25 v v in ? 15 v, t j = 25c, f = 120 hz 37 42 D db dropout voltage v d 1 t j = 25c D 1.7 D v average temperature coefficient of output voltage t cvo 1 i out = 5 ma D 1.0 D mv/c
ta79l005,006,008,009,010,012,015,018,020,024p 2001-08-08 9 TA79L015P electrical characteristics (unless otherwise specified, v in = ? 23 v, i out = 40 ma, c in = 0.33 f, c out = 0.1 f, 0c t j 125c) characteristics symbol test circuit test condition min typ. max unit output voltage v out 1 t j = 25c ? 15.6 ? 15.0 ? 14.4 v ? 30 v v in ? 17.5 v D 130 300 line regulation regline 1 t j = 25c ? 30 v v in ? 20 v D 110 250 mv 1.0 ma i out 100 ma D 25 150 load regulation regload 1 t j = 25c 1.0 ma i out 40 ma D 12 75 mv ? 30 v v in ? 17.5 v, 1.0 ma i out 40 ma ? 15.75 D ? 14.25 output voltage v out 1 t j = 25c 1.0 ma i out 70 ma ? 15.75 D ? 14.25 v t j = 25c D 3.3 6.5 quiescent current i b 1 t j = 125c D D 6.0 ma ? i bi 1 ? 30 v v in ? 20 v D D 1.5 quiescent current change ? i bo 1 t j = 25c 1.0 ma i out 40 ma D D 0.1 ma output noise voltage v no 2 ta = 25c, 10 hz f 100 khz D 90 D v rms long term stability ? v out / ? t 1 D D 30 D mv/kh ripple rejection ratio r.r. 3 ? 28.5 v v in ? 18.5 v, t j = 25c, f = 120 hz 34 39 D db dropout voltage v d 1 t j = 25c D 1.7 D v average temperature coefficient of output voltage t cvo 1 i out = 5 ma D 1.3 D mv/c
ta79l005,006,008,009,010,012,015,018,020,024p 2001-08-08 10 ta79l018p electrical characteristics (unless otherwise specified, v in = ? 27 v, i out = 40 ma, c in = 0.33 f, c out = 0.1 f, 0c t j 125c) characteristics symbol test circuit test condition min typ. max unit output voltage v out 1 t j = 25c ? 18.7 ? 18.0 ? 17.3 v ? 33 v v in 20.7 v D 32 325 line regulation regline 1 t j = 25c ? 33 v v in ? 21 v D 27 275 mv 1.0 ma i out 100 ma D 30 170 load regulation regload 1 t j = 25c 1.0 ma i out 40 ma D 15 75 mv ? 33 v v in ? 20.9 v, 1.0 ma i out 40 ma ? 18.9 D ? 17.1 output voltage v out 1 t j = 25c 1.0 ma i out 70 ma ? 18.9 D ? 17.1 v t j = 25c D 3.3 6.5 quiescent current i b 1 t j = 125c D D 6.0 ma ? i bi 1 ? 33 v v in ? 21 v D D 1.5 quiescent current change ? i bo 1 t j = 25c 1.0 ma i out 40 ma D D 0.1 ma output noise voltage v no 2 ta = 25c, 10 hz f 100 khz D 150 D v rms long term stability ? v out / ? t 1 D D 45 D mv/kh ripple rejection ratio r.r. 3 ? 33 v v in ? 23 v, t j = 25c, f = 120 hz 33 48 D db dropout voltage v d 1 t j = 25c D 1.7 D v average temperature coefficient of output voltage t cvo 1 i out = 5 ma D 1.5 D mv/c
ta79l005,006,008,009,010,012,015,018,020,024p 2001-08-08 11 ta79l020p electrical characteristics (unless otherwise specified, v in = ? 29 v, i out = 40 ma, c in = 0.33 f, c out = 0.1 f, 0c t j 125c) characteristics symbol test circuit test condition min typ. max unit output voltage v out 1 t j = 25c ? 20.8 ? 20.0 ? 19.2 v ? 35 v v in ? 23.5 v D 33 330 line regulation regline 1 t j = 25c ? 35 v v in ? 24 v D 28 285 mv 1.0 ma i out 100 ma D 33 180 load regulation regload 1 t j = 25c 1.0 ma i out 40 ma D 17 90 mv ? 35 v v in ? 23.5 v, 1.0 ma i out 40 ma ? 21.0 D ? 19.0 output voltage v out 1 t j = 25c 1.0 ma i out 70 ma ? 21.0 D ? 19.0 v t j = 25c D 3.3 6.5 quiescent current i b 1 t j = 125c D D 6.0 ma ? i bi 1 ? 35 v v in ? 24 v D D 1.5 quiescent current change ? i bo 1 t j = 25c 1.0 ma i out 40 ma D D 0.1 ma output noise voltage v no 2 ta = 25c, 10 hz f 100 khz D 170 D v rms long term stability ? v out / ? t 1 D D 49 D mv/kh ripple rejection ratio r.r. 3 ? 35 v v in ? 27 v, t j = 25c, f = 120 hz 31 37 D db dropout voltage v d 1 t j = 25c D 1.7 D v average temperature coefficient of output voltage t cvo 1 i out = 5 ma D 1.7 D mv/c
ta79l005,006,008,009,010,012,015,018,020,024p 2001-08-08 12 ta79l024p electrical characteristics (unless otherwise specified, v in = ? 33 v, i out = 40 ma, c in = 0.33 f, c out = 0.1 f, 0c t j 125c) characteristics symbol test circuit test condition min typ. max unit output voltage v out 1 t j = 25c ? 25.0 ? 24.0 ? 23.0 v ? 38 v v in ? 27 v D 35 350 line regulation regline 1 t j = 25c ? 38 v v in ? 28 v D 30 300 mv 1.0 ma i out 100 ma D 40 200 load regulation regload 1 t j = 25c 1.0 ma i out 40 ma D 20 100 mv ? 38 v v in ? 27 v, 1.0 ma i out 40 ma ? 25.2 D ? 22.8 output voltage v out 1 t j = 25c 1.0 ma i out 70 ma ? 25.2 D ? 22.8 v t j = 25c D 3.5 6.5 quiescent current i b 1 t j = 125c D D 6.0 ma ? i bi 1 ? 38 v v in ? 28 v D D 1.5 quiescent current change ? i bo 1 t j = 25c 1.0 ma i out 40 ma D D 0.1 ma output noise voltage v no 2 ta = 25c, 10 hz f 100 khz D 200 D v rms long term stability ? v out / ? t 1 D D 56 D mv/kh ripple rejection ratio r.r. 3 ? 35 v v in ? 29 v, t j = 25c, f = 120 hz 31 47 D db dropout voltage v d 1 t j = 25c D 1.7 D v average temperature coefficient of output voltage t cvo 1 i out = 5 ma D 2.0 D mv/c
ta79l005,006,008,009,010,012,015,018,020,024p 2001-08-08 13 test circuit 1 v out , regline, regload, i b , ? i b , ? v out / ? t, v d , t cvo test circuit 2 v no test circuit 3 r.r.
ta79l005,006,008,009,010,012,015,018,020,024p 2001-08-08 14
ta79l005,006,008,009,010,012,015,018,020,024p 2001-08-08 15 package dimensions
ta79l005,006,008,009,010,012,015,018,020,024p 2001-08-08 16 toshiba is continually working to improve the quality and reliability of its products. nevertheless, semiconductor devices in general can malfunction or fail due to their inherent electrical sensitivity and vulnerability to physical stress. it is the responsibility of the buyer, when utilizing toshiba products, to comply with the standards of safety in making a safe design for the entire system, and to avoid situations in which a malfunction or failure of such toshiba products could cause loss of human life, bodily injury or damage to property. in developing your designs, please ensure that toshiba products are used within specified operating ranges as set forth in the most recent toshiba products specifications. also, please keep in mind the precautions and conditions set forth in the ?handling guide for semiconductor devices,? or ?toshiba semiconductor reliability handbook? etc.. the toshiba products listed in this document are intended for usage in general electronics applications (computer, personal equipment, office equipment, measuring equipment, industrial robotics, domestic appliances, etc.). these toshiba products are neither intended nor warranted for usage in equipment that requires extraordinarily high quality and/or reliability or a malfunction or failure of which may cause loss of human life or bodily injury (?unintended usage?). unintended usage include atomic energy control instruments, airplane or spaceship instruments, transportation instruments, traffic signal instruments, combustion control instruments, medical instruments, all types of safety devices, etc.. unintended usage of toshiba products listed in this document shall be made at the customer?s own risk. the products described in this document are subject to the foreign exchange and foreign trade laws. the information contained herein is presented only as a guide for the applications of our products. no responsibility is assumed by toshiba corporation for any infringements of intellectual property or other rights of the third parties which may result from its use. no license is granted by implication or otherwise under any intellectual property or other rights of toshiba corporation or others. the information contained herein is subject to change without notice. 000707eb a restrictions on product use

▲Up To Search▲

Price & Availability of TA79L015P

	To Download TA79L015P Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .